All conversion guides

Compare MP3 and WAV before exporting audio

The 3D Armory · Updated November 8, 2026

WAV is useful for editing or handing off PCM audio. MP3 can make a recording easier to share when file size matters. Listen to the result before choosing a format and bitrate.

Compare exports from your recording

  1. Open the audio converter and choose your recording. Convert to WAV, listen to the preview, and note the output size.
  2. Convert to MP3 at 128 kbps. Check speech, cymbals, and quiet endings, where encoding changes can be easier to hear.
  3. If the sound is unsatisfactory, repeat at 192 or 320 kbps. Compare the previews and file sizes using the same input.

Compare size and timing

Output options in the audio converter
OutputWhat the setting controls
WAV16-bit PCM at 44.1 kHz. Stereo uses twice the sample data of mono.
MP3128, 192, or 320 kbps. Higher bitrates use more space for the same duration.

MP3 encoding delay and padding can change the duration reported by some decoders, especially for short clips. Check timing in the destination app if you are making a loop or aligning sound to video.

Choose for the next step

Use WAV for further editing or when the destination requires PCM audio. Try MP3 for delivery when the file needs to be smaller. Compare speech, loud passages, and quiet endings from your own recording at the available bitrates. Converting an existing MP3 to WAV prepares it for editing but cannot recover detail lost in its original encoding.

The converter accepts files up to 25 MB and recordings up to ten minutes in mono or stereo. Browser support for source codecs varies. If an input will not decode, export PCM WAV in its original application and try again.